+++w580 gdfs error done via test point by setool+++

procedure:

1.open mo un phone make a test point
2.goto empty fill repair select model
preper your tp cable
click tp stage =1 pag ok na pasok na sa tp
click tp stage=2 pag ok na tapos na ang tp 1 at tp
3. flash gdfs...
4.flash erom
5.back to sonyericson tab and flash main and fs...
6.done....

v0.915037/UNI
CARD SERIAL: joseph_08
Loaded 51 flash de******ors
CFG:000000000000000
RECOVERY MODE STARTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 2 secs.
CFG:000000000000000
RECOVERY MODE STARTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 5 secs.
CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 6 secs.
SIGNED MODE (USING SERVER)
CFG:100000000001000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
No ack during gdfsWrite command.
final preparation fail. see messages above.
Elapsed: 10 secs.
CFG:000000000001000
TESTPOINT REPAIR STAGE #1 STARTED
ATTACH TESTPOINT NOW, THEN PRESS "READY"
PROCEDURE WAS STOPPED BY USER
Elapsed: 3 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #1 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
DONE
TESTPOINT REPAIR STAGE #2 STARTED
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 84 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #2 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 26 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #2 STARTED
PROCEDURE WAS STOPPED BY USER
Elapsed: 28 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #2 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 28 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #2 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
PROCEDURE WAS STOPPED BY USER
TP #2 INCORRECT OR STAGE #1 NOT EXECUTED
Elapsed: 61 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #2 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
WRITING EROM...
DONE
Elapsed: 21 secs.
CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 1 secs.
CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
phone CID not supported in that mode
Elapsed: 6 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing "F:\main setool suite\gdfs_in_ssw_format\db2020\W580_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
HDR block not accepted,error: 19
Elapsed: 8 secs.
CFG:000000000000000
TESTPOINT REPAIR STAGE #1 STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
PREPARING...
ATTACH TP #1 AND PRESS "READY"
RELEASE TP #1 AND PRESS "READY"
TP #1 LOOKS OKAY
DONE
TESTPOINT REPAIR STAGE #2 STARTED
ATTACH TP #2 AND PRESS "READY"
Starting embedded bootloader...
TP #2 LOOKS OKAY
RELEASE TP #2 AND PRESS "READY"
INT LDR:DB2020_PRELOADER_FOR_SETOOL2
WRITING EROM...
DONE
Elapsed: 87 secs.
CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "F:\main setool suite\gdfs_in_ssw_format\db2020\W580_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "48437387"
SIGNING...
Elapsed: 45 secs.
CFG:000000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
Flash ID check:897E
Flash props sent ok
writing "F:\main setool suite\eroms\db2020\DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 40
Will flash 2 blocks...
SSW loading returns:0
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "54604518"
SIGNING...
Elapsed: 11 secs.
SIGNED MODE (USING SERVER)
CFG:100010000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:01127100430542 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
writing "F:\setool_sony ericson\w580\cid_52\R6BC002_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
SSW loading returns:0
writing "F:\setool_sony ericson\w580\cid_52\R6BC002_FS_APAC_LA_RED_CID52.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 4820
Will flash 241 blocks...
SSW loading returns:0
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed
using GENERIC phone customization
tpa/preset/custom/C3_PCA_G3v2.cer
tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
tpa/preset/custom/customize.xml
tpa/preset/custom/DESKTOP_HOOK_2.itm
tpa/preset/custom/Entrust.net Root Certificate.cer
tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
tpa/preset/custom/FM_PICTURES_HOOK_3.itm
tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
tpa/preset/custom/FM_THEMES_HOOK_3.itm
tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
tpa/preset/custom/GAMES_HOOK_3.itm
tpa/preset/custom/GTE_CyberTrust_Root.cer
tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
tpa/preset/custom/Root.cer
tpa/preset/custom/SEMC_E2E_Root_CA.crt
tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
tpa/preset/custom/ThawtePremium.der
tpa/preset/custom/ThawteServerCA.cer
tpa/preset/custom/Utiroot.cer
tpa/preset/custom/VeriSignClass3Root.cer
tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
Phone detached
Elapsed: 829 secs.

+++motorola U9 unlock by smartclip done+++

SmartMoto 4.05
S-Card: joseph_087 Smart-Clip dongle, v 3.03, assigned Smart-Clip: 314333883 Europe, initializing... OK
Smart Adaptor: serial joseph_08, firmware version 1.05
Clip serial: 314333883, version: 5.02, initializing... OK
Searching for phone... found U9, getting test interface... AT command error
Retrying phone search ... found U9, getting test interface... OK
Model
Firmware R6632_G_81.27.06R_C_81.27.06R_C
Switching to flash mode... OK [S Flash SCM-A11]
Reading phone boot version... 6.2A
Restarting phone...OK
Searching for phone... no phone found
Searching for phone... found S Flash SCM-A11, getting test interface... interface not found
Switching to flash mode... OK
Unlocking phone...OK

+++Motorola L6 unlock done via test point+++

procedure:

1.Desassemble the phone
2.Connect usb cable (not repair one)
3.Connect testpoint to ground
4.Connect phone battery
5.Rress search button in smartmoto
6.Smartmoto should find S-blank rainbow pog
7.Disconnect testpoint
8.The phone is ready for flash/repair operattion

SmartMoto 4.05
S-Card: xxxxxxxxxxxxx Smart-Clip dongle, v 3.03, assigned Smart-Clip: xxxxxxxxxx Europe, initializing... OK
Smart Adaptor: serialxxxxxx, firmware version 1.05
Clip serial: xxxxxxx, version: 5.02, initializing... OK
Searching for phone... found S Blank Neptune LTE, getting test interface... interface not found
Switching to flash mode... OK
Reading phone boot version... 2.00
Reading flash id... ST - M30L0R8000B0
Phone group: A630,E1,E37x,E39x,E55x,L6,U6,V3,V190,V330,V53x,V54x,V55x,V62x,V635,V80
Hardware IMEI: 3598020084xxxxxxx
IMEI OTP status: locked
Security area saved to "PDS for S Blank Neptune LTE 359802008xxxxx (2).mbk"
Writing flash section 1 of 1... 100% (20.6 Kb/sec)
Turning phone off...  OK
Searching for phone... found S Blank Neptune LTE
Switching to flash mode... OK
IMEI OTP status: locked
Unlocking phone... OK

+++motorola w450 unlock done++++++

w450 lock sa at&t
unlock sa smarclip w/ s-card done........




procedure:

1. Connect S-Card and Mini USB data cable to PC USB port and launch SmartMoto.
2. Select "Computer COM ports" in Phone connection area.
3. Log to the tab "Compal models"
4. Choose an appropriate model from the list.
5. Press Unlock button.
6. SmartMoto will inform "Connect phone to computer USB port before proceeding".
7. Connect data cable to the powered OFF phone with inserted battery.
8. The SmartMoto will automatically (no user intervention is required during the installation) install "Locosto flash interface" driver and display the following message: "reconnect phone and try again".
9. Disconnect data cable from the phone, remove and insert the battery back to the phone.
10. Connect data cable and press Unlock again.
11. The unlock process continues.
12. Message "Unlock ok" informs that process is finished and the phone can be disconnected.

SmartMoto 4.05
S-Card: joseph_08 Smart-Clip dongle, v 3.03, assigned Smart-Clip: joseph_08 Europe, initializing... OK
Connect phone to computer USB port before proceeding...Ok, reconnect phone and try again
Connect phone to computer USB port before proceeding...failed
Connect phone to computer USB port before proceeding...OK
Sending boot...OK
Hardware IMEI: 351521030093xxx
Manufacturer: Intel,    Model: 28F256L18TMP
Unlocking phone...OK
Turning phone off